Quick Quote
National Hotline:+86 13905263417 Monday to Saturday 8:00-17:30

Why does the mechanical seal fail after the BB5 high-pressure pump shuts down? Jiangsu Haifa analyzes the leak-free design from Plan 54 and overpressure protection

2026-11-17 11:07:14 354 江苏海珐

In 2026, a BB5 water injection pump incident published by Saudi Aramco in Hydrocarbon Processing provides a typical case of "failure after shutdown" in high-pressure pumps. The pump uses an API 610 BB5 double-casing structure and API Plan 54 dual pressurized mechanical seal. The seal was in good condition during normal operation, but after shutdown, severe leakage occurred simultaneously at both the drive end and the non-drive end. Investigation found that after the suction inlet was isolated, a closed liquid space formed in the pump cavity, and a discharge path was not established in time. Even when the high-pressure side valve was in the closed position, a small amount of internal leakage could still exist. Because water is almost incompressible, even a small amount of high-pressure liquid can rapidly pressurize the pump body and seal chamber. The Plan 54 pressure transmitter reading surged to the upper limit of400 psig, ultimately causing the seal faces to fracture. case shows that BB5 Mechanical Seal Reliability cannot be judged solely by the mechanical seal itself. Plan 54 essentially uses an external system to continuously supply clean, pressurized Barrier Fluid to the seal, and its pressure must always be higher than the seal chamber pressure. The system design also needs to consider cooling, filtration, alarms, and low-pressure protection. Jiangsu Haifa Machinery Manufacturing Co., Ltd. (www.jslgpump.com), in the design of products such as API 610 BB5 high-pressure multistage pumps, high-pressure water injection pumps, and high-pressure hydrogenation liquid feed pumps, can incorporate Pump Shutdown Overpressure, Trapped Liquid, and Seal Chamber Pressure Transient into P&ID and interlock reviews. For Plan 54, suction pressure monitoring, high-pressure alarms, and a reliable pressure relief/discharge path should be configured and the actuation logic of MOVs, check valves, minimum flow recirculation valves, and Dump Valves should be to avoid forming Blocked-In Liquid after pump shutdown. The focus of future BB5 leak-free design should be upgraded from "selecting a good mechanical seal" to Pump-Seal-Piping Integrated Design. By combining Pressure Transient Monitoring, Shutdown Interlock Verification, Digital Seal Condition Monitoring, mechanical seal failure prevention can be moved forward to the system design and shutdown operation stages. Chinese References Chinese Technical Direction | API 610 BB5 high-pressure pumps, API Plan 54 dual pressurized mechanical seals, shutdown overpressure, trapped liquid pressurization, suction line isolation logic, and mechanical seal failure analysis. Chinese Technical Materials | Jiangsu Haifa Machinery Manufacturing Co., Ltd.: API 610 BB5 high-pressure multistage pumps, high-pressure water injection pumps, and mechanical seal system design technical direction. Company website: https://www.jslgpump.com/ English References English Reference | Wesam Khalaf Allah, Amer Al-Dhafiri, Saudi Aramco. Water injection pump mechanical seals failure after pump shutdown. Hydrocarbon Processing, June , 2026. The article analyzes the overpressure in the pump cavity and severe mechanical seal failure of an API 610 BB5 double-casing water injection pump after shutdown due to isolation of the suction system and pressure relief path. English Technical Reference | John Crane. API 682 Plan 54 Seal Support Systems Design Guidelines. Plan 54 uses an external pressure source to provide clean pressurized barrier fluid to dual mechanical seals and requires dedicated pressure, flow, and system design to operating conditions. English Technical Reference EagleBurgmann. Piping Plan 54 Plan 54 is suitable for conditions such as high pressure, high temperature, solids-containing, poor lubricity, and near-vaporization conditions. The barrier fluid pressure should be maintained above the seal chamber pressure and continuously circulated and cooled. English Case Reference | Sulzer. Polymer Wear Parts in BB5 Type Pump Upgraded to Ceramic Material to Withstand Transient Service Conditions. This BB5 case shows that transient conditions and internal component failure may cause overpressure in the mechanical area. Therefore, high-pressure pump reliability must also consider internal clearances, materials, and Transient Conditions

www.jslgpump.com



  • 上一篇:"15th Five-Year Plan" heralds a new era for specialty pumps in energy storage: Jiangsu Hǎifǎ lays out plans for liquid air, molten salt thermal storage, and flow battery recycling systems
  • 下一篇:没有了
  • Get Professional Selection Solution

    Jiangsu Haifa Machinery Manufacturing Co., Ltd.

    📍 Headquarters: Jingjiang Economic and Technological Development Zone, Jiangsu Province (Yangtze River Delta Ecological Green Integration Demonstration Zone, Jingjiang Park)

    📞 Hotline: (086)13905263417 & (086)13908365805

    📠 Fax: (086)0523-84323581

    📧 Email: jsareva@163.com     jslgpump@gmail.com

    🔧 Technical Support: One-stop service for pump & valve customization, non-standard design, on-site surveying, maintenance and repair

    Member of China General Machinery Industry Association | Director of Valve Association | SINOPEC Resource Market Member Factory


    Get QR Code
    Get QR Code

    Online Inquiry / Technical Consultation

    *Your information will be kept strictly confidential. An engineer will contact you within 24 hours.