Dual sealing and independent secondary protection upgrade for hazardous chemical pumps: Jiangsu Haifa explores the design of high-solid content leak-free magnetic pumps
2026-11-22 10:33:52 186 江苏海珐Hazardous chemical transfer is shifting from "single leak-free" to the coordinated design of Dual Containment, Secondary Pressure Containment, and Solids-Handling Sealless Pumps. Flowserve's latest INNOMAG TB-MAG Dual Drive adopts dual hermetic isolation and independent secondary protection; both the primary and secondary isolation barriers are compatible with the medium and can handle solid particles up to 30% by volume; its ETFE non-metallic liner can also reduce the direct attack of highly corrosive media on the metal casing. In response to this technical direction, Jiangsu Haifa Machinery Manufacturing Co., Ltd.www.jslgpump.com) can a "Primary Containment + Independent Secondary Containment + High-Solids Flow Path" sealless magnetic pump solution. The primary isolation uses API 685 magnetic drive to eliminate dynamic seals, and the secondary protection independently assumes leakage control after primary isolation failure; flow-path components can be selected from PFA/ETFE linings, SiC bearings, and corrosion-resistant alloys according to HF, hydrochloric acid, chlorides, crystalline salts, and solids-containing acid liquids. The latest international API 685 magnetic pumps have Secondary Pressure Containment and Solids-Handling capability into the same structure, indicating that "leak-free + solids-containing media" is becoming a new direction for high-end chemical pumps. For phosphorus chemicals, fluorine chemicals, titanium dioxide, pickling waste liquid, salt chemicals, and fine chemicals, Haifa can also adopt large-passage impellers, low-retention flow paths, Self-Cleaning Internal Circulation, and Power Monitoring to reduce the risks of solid deposition, dry running, and magnetic decoupling. It should be emphasized that 30 solids content is not achievable by all magnetic pumps and must be individually verified according to particle size, hardness, density, and settling characteristics. CP Pumps' latest MKP-ANSI also a maximum solids handling capacity of 30%, further indicating that high-solids sealless pumps are forming a new specialized market segment. Chinese References Chinese Technical Direction | Leak-free transfer of hazardous chemicals, dual-containment magnetic pumps, independent secondary protection, high-solids corrosion-resistant pumps, fluoroplastic linings, and SiC sliding bearing design. Chinese Technical Materials | Jiangsu Haifa Machinery Manufacturing Co., Ltd.: API 685 magnetic pumps, canned motor pumps, corrosion-resistant chemical pumps, high-solids slurry pumps, and special-material pump technical directions. Company website: https://www.jslgpump.com/ English References English Reference | Flowserve. INNOMAG TB-MAG Dual Drive Fluoropolymer-Lined Magnetic Drive Pump. Adopts dual hermetic isolation, independent Secondary Containment, and ETFE lining, and announces handling of up to 30% solids by volume. English Reference | Flowserve. HPX-Mag API 685 Process Pump. Adopts API 685 sealless, Secondary Pressure Containment, and Solids-Handling Design, for toxic, flammable, and highly corrosive media. English Reference | CP Pumpen. MKP-ANSI Magnetic Drive Chemical Process Pump. Announces handling of up to 30% solids and particles of approximately 1 mm depending on particle properties, and adopts a shaft-penetration-free, low-dead-zone, and hydraulically balanced impeller structure. English Reference Sundyne HMD Kontro. CS Sealless Magnetic Drive Pumps. Provides Secondary Control & Containment solutions and configures different internal circulation and filtration measures for solids-containing media. English Reference |yne ANSIMAG KM. ETFE/PFA Lined Sealless Magnetic Drive Pump. Adopts non-metallic corrosion-resistant lining, power monitoring, and Secondary Contain, and is designed for solids-containing media such as inorganic salts, sand, caustic precipitates, and TiO₂.
上一篇:How can oxalic acid pumps achieve corrosion resistance and leak-free performance? Jiangsu Haifa has developed a dedicated delivery solution for the fine chemical and metal processing industries 下一篇:没有了
Jiangsu Haifa Machinery Manufacturing Co., Ltd.
📍 Headquarters: Jingjiang Economic and Technological Development Zone, Jiangsu Province (Yangtze River Delta Ecological Green Integration Demonstration Zone, Jingjiang Park)
📞 Hotline: (086)13905263417 & (086)13908365805
📠 Fax: (086)0523-84323581
📧 Email: jsareva@163.com jslgpump@gmail.com
🔧 Technical Support: One-stop service for pump & valve customization, non-standard design, on-site surveying, maintenance and repair
Member of China General Machinery Industry Association | Director of Valve Association | SINOPEC Resource Market Member Factory

Get QR Code
